Blackmagic Design GPI and Tally Interface Hero
Blackmagic Design GPI and Tally Interface Connectors
  • SKU: SWTALGPI8

Blackmagic Design GPI and Tally Interface

$664.00
  • Vendor: Blackmagic Design
  • Product Type: Accessories

GPI & Tally interface provides 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub routers. Tallies will be displayed when connected to an ATEM switcher to indicate their "on-air" status and you can even connect multiple interfaces together to increase the number of inputs and outputs.

GPI and Tally Interface also works as a Videohub control panel without buttons and LEDs so you can make your own! Now anyone can connect to Videohub routers to control cross-points!

For further information check out the Blackmagic Design website

Connections Contact Closure: 25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs.
Computer Interface: 1 x USB 2.0 high speed interface for configuration and firmware updates.
Inputs: Optical isolators triggered by connection to ground. Max 5V at 14mA.
Outputs: Mechanical relay contact closure to ground. Max 30V at 1A.
Ethernet: 10/100 BaseT with loop through for connecting to other ethernet enabled equipment.
Software Software Included: Configured via ATEM Switcher Utility.
Internal Software Upgrade: Firmware built into software driver. Loaded at system startup or via updater software.
Operating Systems Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan or later.
Windows 8.1 or Windows 10.
Power Requirements Power Supply: 12V power supply included with international socket adaptors for all countries.
Environmental Specifications Operating Temperature: 0° to 40° C (32° to 104° F)
Storage Temperature: -20 - 60 degrees celsius
Relative Humidity: Up to 95%
What's Included GPI and Tally Interface
Software CD
Power Supply
Warranty 12 Months Limited Manufacturer's Warranty.

*Specifications correct at time of publication

RELATED PRODUCTS

BACK TO TOP