No Products in the Cart
ATEM Studio Converter is the ideal partner for the ATEM Camera converter. Connect up to four Camera Converters via optical fiber up to 28 miles away with bi-directional video plus tally and talkback! Connect your ATEM switcher program output to the ATEM Studio Converter and this is distributed to the four Camera Converters.
Multiple Studio converters can be cascaded together when more than 4 cameras are needed. Studio converter can also be used as four independent SDI or Fiber to HDMI converters and four independent simultaneous SDI to Optical and Optical to SDI converters!
Now you can position your cameras a long distance away from your switcher and get closer to the action with ATEM Camera and Studio Converters. ATEM Camera converter is a super tough optical fiber converter with talkback, tally, microphone inputs and a built in long life battery. Using low cost optical fiber you can connect to your cameras up to 28 miles away and even at those great distances you still get full bi-directional video, audio, talkback and tally signals!
ATEM Converters are the perfect solution for live music and sporting events where you need to place cameras in remote locations such as on race tracks or near to a stage, where there is a huge distance between the live action and your switcher! Connect up to 4 ATEM Camera converters to each ATEM Studio Converter and get multiple camera talkback, so all camera operators can communicate with the switcher operator using talkback that is embedded into channels 15 and 16 of the optical fiber SDI connection.
There are two ATEM converters for use at opposite ends of a live camera connection! ATEM Camera converter converts your camera’s SDI or HDMI output to optical fiber, with embedded external audio and talkback from the camera position. The machined aluminum design is lightweight, strong and includes an internal long life battery for increased portability. ATEM Studio Converter’s rack mount design has 4 bi-directional optical fiber connections so you can connect multiple camera converters and convert the optical fiber input to SDI and de-embed audio using XLR connections.
ATEM Camera converter and ATEM Studio Converter are designed to be used at either end of a live camera connection. Now you can easily connect cameras to production switchers, even when they are huge distances apart. Each converter has been designed to make it easier than ever to connect to cameras with video, audio, talkback and tally. The battery powered ATEM Camera converter is located at the camera and is designed to be used in remote locations. The ATEM Studio Converter has a rack mount design that contains all connections built into the unit, ready for your next event.
For further information check out the Blackmagic Design website
|SDI Video Input||1 x 10 bit SD/HD switchable.|
|SDI Video Output||1 x 10 bit SD/HD switchable.|
|HDMI Video Input||1 x HDMI type A connector.|
|HDMI Video Output||1 x HDMI type A connector.|
|Talkback Audio||1 x 3.5mm stereo connector for talkback microphone. 1 x 3.5mm stereo connector for stereo headphones, compatible with iPhone headsets.|
|Analog Audio||2 x balanced 1/4" TRS connectors (stereo) microphone level in. When connected, replaces audio from SDI In or HDMI In.|
|Optical Fiber Video Input||1 x single mode SD/HD switchable with LC connector.|
|Optical Fiber Video Output||1 x single mode SD/HD switchable with LC connector.|
|Optical Fiber Audio Input||4 x single mode camera audio inputs with LC connector. Channels 1 & 2 are camera audio. Channels 15 & 16 are intercom audio.|
|Optical Fiber Audio Output||4 x single mode camera audio outputs with LC connector. Channels 1 & 2 are camera audio. Channels 15 & 16 are intercom audio.|
|Computer Interface||1 x mini-B type USB 2.0 connector for initial setup, firmware updates and Converter Utility software control.|
|SDI Format Support||525i59.94, 625i50, 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97,1080p30, 1080p50, 1080p59.94, 1080p60, 2048x1080p/23.98, 2048x1080p/24, 2048x1080p/25,2048x1080PsF/23.98, 2048x1080PsF/24, 2048x1080PsF/25, 2048x1556PsF/23.98, 2048x1556PsF/24,2048x1556PsF/25.|
|HDMI Format Support||525i59.94, 625i50, 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97,1080p30, 1080p50, 1080p59.94, 1080p60.|
|SDI Compliance||SMPTE 259M, SMPTE 292M.|
|Audio Sampling||Television standard sample rate of 48Khz, 24 bit A/D conversion.|
|Colour Space||REC 601, REC 709|
|Multiple Rate support||SDI and HDMI are switchable between between standard definitlon and high definition|
|Software Included||Converter Utility.|
|Operating Systems||Mac OS X 10.9 Mavericks|
|Mac OS X 10.10 Yosemite or later|
|Windows 7 or Windows 8|
|Power Supply||12V power supply included with international socket adaptors for all countries.|
|Operating Temperature||0° to 40° C (32° to 104° F)|
|Storage Temperature||-20° to 45° C (-4° to 113° F)|
|Relative Humidity||0% to 90% non-condensing|
|What's Included||ATEM Camera Converter|
|Warranty||3 Year Limited Manufacturer's Warranty.|
*Specifications correct at time of publication