Magewell USB Capture DVI Plus
Magewell USB Capture DVI Plus Connections
Magewell USB Capture DVI Plus end
Magewell USB Capture DVI Plus - DVI Input
  • SKU: 32080

Magewell USB Capture DVI Plus

$629.00
  • Vendor: Magewell
  • Product Type: Capture & Playback

One-channel HD capture card.

Captures one of the following:

  • DVI + audio
  • VGA + audio
  • Component + audio
  • HDMI + embedded audio
  • Audio input via Line in
  • Extract HDMI embedded audio output via Line out

Find out more info over at magewell.com

Supported OS Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
Ubuntu 12.04/14.04/16.04/17.04/17.10 (x86 & x64)
CentOS 6.5/7 (x86 & x64)
Fedora 25/26/27 (x86 & x64)
Red hat 6.5 and above (x86 & x64)
Other Linux OS with kernel version 2.6.35 and above
OS X 10.9/10.10/10.11
macOS 10.12/10.13
Chrome OS
Supported APIs Windows - DirectShow, Wave API/DirectSound/WASAPI
Linux - V4L2, ALSA
OS X/macOS - QuickTime, AV Foundation
Supported Software VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow, V4L2, QuickTime, AV Foundation based encoding or streaming software
Input Interfaces DVI 1.0
HDMI 1.4a (via breakout cable)
VGA (via DVI-to-VGA convertor)
Component (via breakout cable)
3.5mm audio jack (unbalanced Line In interface)
Host Interface USB 3.0 (compatible with USB 2.0 and USB 3.1 Gen 1)
Output Interface 3.5mm audio jack (unbalanced Line Out interface)
Input features Auto scan of video input sources when there is no signal input to the currently selected input source
Manual selection of video input source
Auto selection of linked (embedded) audio input source when the video input source changes
Manual selection of audio input source
Support for input video resolutions up to 2048x2160
VGA & Component Specific Features 12-bit ADC
Support for RGB & YCbCr (YUV) colour formats
Support for ‘Separated sync’, ‘Composite sync’, ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY)
Support for DMT, CEA, CVT, GTF video timings
Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss - NOT recommended)
Auto detection of RGB & YCbCr color formats
Auto or manual sampling phase adjustment
Auto horizontal alignment
Support for customized video timings
Support for customized video resolutions for CVT/GTF timings
HDMI Specific Features 225MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for 8/10/12-bit colour depths
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 colour sampling
Support for up to 2 channel IEC60958 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
Analog Audio Features Extraction of stereo embedded HDMI audio for recording and output via 3.5mm stereo mini-jack Line Out
Capture of stereo analog audio from Line In (3.5 mm stereo mini-jack socket)
Video Capture format Support for capture resolutions up to 2048x2160
Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB3.0 controller are as follows.)
1920x1080 YUY2 (up to 75fps)
1920x1080 RGB24 (up to 60fps)
Support for YUY2 & UYVY 4:2:2 8-bit
Support for RGB24 & RGB32 4:4:4 8-bit
The default capture format is YUY2. More capture format can be set using USB Capture Utility.
Video Processing Features Video processing pipelines with 160 Mpixels/s processing bandwidth
Video cropping
Video scaling
Video de-interlacing (Weave, Blend top & bottom field, Top field only, Bottom field only)
Auto or manual selection of input aspect ratio
Auto or manual selection of capture aspect ratio
hree aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Auto or manual selection of input color format & quantization range
Auto or manual selection of capture color format, quantization range & saturation range
Support for RGB, YCbCr 601, YCbCr 709 color formats
Support for Limited or Full quantization range
Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Vertical flip and mirror
Multiple devices on one computer Support for connecting multiple USB devices to one system
Support for setting the device serial number as the device name shown in the system using USB Capture Utility
SDK The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.
Firmware Upgrade Multiple devices in one system can be upgraded simultaneously
LED Indicator Pulsing slowly: idle
On: input signal locked
Off: input signal unlocked
Double blinks: memory failed or FPGA configuration failed
Form Factor 101.5mm (L) x 56.8mm (W) x 17mm (H)
Accessories USB 3.0 cable
DVI to VGA connector
DVI-I to HDMI + Component breakout
DB9 to YC + Composite + Analog Audio + Component breakout
Power Consumption 5V max current: 600mA
max power consumption: ~ 3W
Working Environment Operating temperature: 0 to 50 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing

RELATED PRODUCTS

BACK TO TOP