PLEASE BE AWARE THERE ARE DELAYS BEING EXPERIENCED ACROSS ALL FREIGHT NETWORKS DUE TO COVID-19 - WE APOLOGISE FOR ANY DELAYS YOU MAY EXPERIENCE DUE TO THESE CIRCUMSTANCES.
We offer the following shipping options for all items except software downloads and bulky items:
Standard Shipping $25
Express Shipping $45
Some items may be considered Bulky and therefore their shipping charge is $50, this is calculated at the checkout if applicable. This is the total shipping charge and is not in addition to our Standard or Express Shipping charges.
All orders (in stock items) must be placed by 12.30pm AEST/AEDT for same day despatch. Orders placed after 12.30pm, during weekends, holidays or after hours will be processed the following business day.
We do our best to maintain stock of our most popular items, all other items are normally despatched within a few days however we will advise you if your item is not in stock within a few hours (excluding weekends and public holidays) and will advise of the approximate delivery time.
We primarily use Australia Post, TNT, StarTrack Express, Couriers Please, TFM Logistics and Toll Express depending on the delivery location and shipping option chosen.
Delivery timings are approximate and may differ due to circumstances outside of our control such as flight delays, traffic incidents, extreme weather etc.
Software downloads that do not require delivery of a physical product do not attract a shipping charge. Serial Numbers will be emailed within 24 hours, turnaround is often within a few hours.
The Canon ME200S-SH Multi-Purpose Camera features a locking EF mount and captures video at up to 1920 x 1080p 60 (59.94p), while supporting both NTSC and PAL broadcast frame rates. The camera incorporates a Super 35mm-sized sensor with 12 stops of dynamic range and an ISO of up to 204,800. It supports EOS Standard, Wide DR, Canon Log, and allows you to set up to six custom picture settings to protect highlight and shadow detail.
The camera body is small in size, perfect for getting the shot from a hard-to-reach space. It features a digital teleconverter that can be set to provide 2x, 4x, or 8x zoom effect. With two HD/3G-SDI outputs and a single HDMI output, the camera incorporates a genlock-in for integrating this camera into a multi-camera shoot, as well as 2.5mm stereo mini jack and a RS-422 port for control. You can power the camera using 12 VDC by either the 2-pin Phoenix connector or the built-in 4-pin XLR connector.
Small and lightweight, Canon's ME200S-SH is the ultimate solution for broadcast, cinematic productions and surveillance. You can even fit it to a drone.
This multifunction camera offers an equivalent ISO range of 320 - 204,800, so you can shoot clear video with reduced noise in low light shooting conditions.
Employing 3G/HD-SDI and HDMI output terminals, this cinema camera lets you output full HD imaging at a full frame rate of up to 60fps.
Switch between EF lenses quickly and easily using the Canon EF locking mount to attach and remove lenses without rotating the barrel.
With Dual Pixel CMOS Autofocus (DAF), focus transitions will look natural and subjects will remain focused even in unpredictable conditions.
Your Canon ME200S-SH cinema camera is ready to go anywhere and quick to configure, whatever the environment, when you get there.
Find out further information over at the Canon website.
Sensor | Super 35mm |
---|---|
Pixels | Total: 4206 x 2340 (approximately 9.84 MP) |
Effective: 3840 x 2160 (approximately 8.29 MP) | |
Output Resolution | 1920 x 1080 |
1280 x 720 | |
Color Filter System | RGB Bayer array |
Lens Port | Canon EF Cinema-Lock-type |
Interface (Inputs/Outputs) | Outputs HD/3G-SDI: 2 (#1 with selectable OSD, #2 clean) HDMI: 1 (selectable OSD) |
Inputs Genlock: Black burst or Tri-Level reference Mic: 1 x 3.5 mm stereo mini jack (plug-in power mic supported) Remote Control A: 1 x 2.5 mm stereo mini jack (Canon unique protocol) Remote Control B: 1 x circular 8-pin connector (Canon unique protocol) |
|
Format | 3G-SDIBit Depth: YCbCr422 10bits (effective bits: 8) 1920 x 1080p: 59.94/50/29.97/25/23.98 1920 x 1080i: 59.94/50 1280 x 720p: 59.94/50/29.97/25/23.98 |
HDMIBit Depth: RGB444, YCbCr422, YCbCr444 (effective bits: 8 for each format) 1920 x 1080p: 59.94/50/29.97/25/23.98 1920 x 1080i: 59.94/50 1280 x 720p: 59.94/50/29.97/25/23.98 |
|
Please Note: You cannot set framerate and output size separately by SDI and HDMI. Also, when outputting via HDMI, 640 x 480: 59.94P & 768x576: 50P will be output when connected with a monitor that support 480P and 576P inputs. This cannot be set from the menu and the on-screen display will not show. | |
Exposure | Auto: Iris, Gain, Shutter and ND operating together (cannot set auto / manual separately) AE shift / AE response selectable AGC limit can be set from 36dB to Off/75dB (3-dB intervals |
Min Illumination | 0.015 lux or less (at 56dB, F1.2, 29.97P, 1/30 sec shutter) |
Shutter | Manual: 1/3 to 1/2000 (1/4 stops); 1/3 only at 23.98p Auto: Iris, Gain, Shutter and ND operating together |
Iris | Manual: 1/2 stops (push auto iris can be set to an assign button) Auto: Iris, Gain, Shutter and ND operating together |
Gain | Manual: 0dB to 56dB @ 3dB intervals (approx. ISO 204,800 equivalent at 56dB) Auto: Iris, Gain, Shutter and ND operating together |
Built-in Filters | ND: 1/8 & 1/64 Built-in (auto or motorized manual) IR Cut Filter: On/Off (motorized manual) |
Focus Control | Manual focus (when used with RC-V100) One-Shot AF (used with assign button) |
White Balance | AWB (2,000K-15,000K), Daylight, Tungsten, Custom Set A, Custom Set B |
Power | Input: 11 to 17 VDC Consumption: approximately 11 W (body only) Input Connectors1 x 4-pin XLR 1 x 2-pin Phoenix |
Operating Temperature | Approx. 32 to 104°F /0 to 40°F |
Dimension | 4.0 x 4.6 x 4.4" / 102 x 116 x 113 mm |
Weight | Approx. 2.2 lb / 1.0 kg |
Specifications correct at time of publication. |