Magewell Pro Capture AIO
Magewell Pro Capture AIO - Front View
Magewell Pro Capture AIO - Top view
Magewell Pro Capture AIO connections
  • SKU: 11020

Magewell Pro Capture AIO

$761.00
  • Vendor: Magewell
  • Product Type: Capture & Playback

Magewell Pro Capture AIO - One channel HD capture card.

The Magewell Pro Capture AIO captures one of the following:

  • SDI + embedded audio
  • DVI + audio
  • VGA + audio
  • Component + audio
  • Composite + audio
  • S-video + audio
  • HDMI + embedded audio

Features

  • PCIe 2.0
  • Capture 2k x 2k
  • Compatible with Windows
  • Compatible with Linux
  • Compatible with Mac OS X
  • Up/down Scaling
  • Deinterlacing
  • Multiple Streaming
  • Automatically Detecting Input Signal
  • High-fidelity Video Processing Pipeline
  • Image Control
  • Various Output Color Spaces
  • SG-DMA Transmission Mode
  • Multiple Devices on One Host
  • Hardware Time Stamp
  • Mounting Hole
  • Rotary Switch
  • High-speed Memory
  • LED Indicator
  • Firmware Upgrade
  • Common Driver
  • Continuously Works 24 x 7

Get the most of your Magewell device with these software driver utilities from Magewell

For more information on the Magewell Pro Capture AIO, check out the Magewell website.

Magewell Pro Capture AIO connections

Supported OS Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (based on V4L2 , supports x86, x64 & arm architecture)
Mac OS X
Supported APIs Windows:
DirectShow
DirectKS
Wave API/DirectSound/WASAPI
Linux:
V4L2
ALSA
Supported Software VLC
VirtualDub
OBS
xSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software
Input Interfaces DVI-I:
DVI 1.0
HDMI 1.4a (via breakout cable)
VGA (via DVI2VGA connector)
Component (via breakout cable)
DB9:
YC (S-Video)
Composite video
Analog audio (L+R)
Component video
BNC:
SD/HD/3G SDI
Output Interfaces PCIe Gen2 x 1
2 x SMA (SDI loopback)
Input Features Auto scan of video input sources when there is no signal input to the currently selected input source
Manual selection of video input source
Auto selection of linked (embedded) audio input source when the video input source changes
Manual selection of audio input source
Support for standard crossbar based on video input source selection
Support for input video resolutions up to 2048×2048 pixels
VGA & Component Specific Features 12-bit ADC
Support for RGB & YCbCr (YUV) color formats
Support for ‘Seperated sync’, ‘Composite sync’, ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY)
Support for DMT, CEA, CVT, GTF video timings
Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss – NOT officially supported. Not recommended)
Auto detection of RGB & YCbCr colour formats
Auto or manual sampling phase adjustment
Auto horizontal alignment
Support for customized video timings
Support for customized video resolutions for CVT/GTF timings
HDMI Specific Features 225MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for 8/10/12-bit colour depths
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for up to 8-channel IEC60958/IEC61937 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
SDI Specific Features Integrated cable equalizer supporting cable lengths up to 230M for HD signals
Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
Support for 2K (2048×1080) mode
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for 10/12-bit colour depth
Support for extraction of SMPTE 352 payload identifier
Support for up to 8 audio channels at 48KHz
Support for extraction of audio formation information & channel status data
Limited support of 3Gb-DS: only the first stream can be captured
Limited support of 3Gb-DL:
2K YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
Other modes: full supported
Limited support for capture of the first link of dual link interfaces:
YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
YCbCr 4:4:4 10-bit: captured as 4:2:2
RGB 4:4:4: R/B sub-sampled
YC & Composite Specific Features 12-bit ADC
Support for NTSC, PAL and SECAM standards
Auto detection of video input standard
Video Output Formats Support for output image resolutions up to 2048×2048 pixels
Support for output frame rates up to 144fps. (Actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions – above 1280×1024 – by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920×1080 = ~80fps. )
Support for 4:2:0 8-bit output formats: NV12, I420, YV12
Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32
Support for 4:4:4 10-bit output formats: V410, Y410
More output formats are supported via Pro Capture SDK for DirectKS
Video Processing Features Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one
Full 10-bit video processing
Video cropping
Video scaling
Video de-interlacing:
Weave
Blend top & bottom field
Top field only
Bottom field only
Video aspect ratio conversion:
Auto or manual selection of input aspect ratio
Auto or manual selection of output aspect ratio
Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video colour format conversion:
Auto or manual selection of input colour format & quantisation range
Auto or manual selection of output colour format, quantization range & saturation range
Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
Support for Limited or Full quantisation range
Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Video OSD composition:
Support for PNG OSD image (up to 2048×2048)
Support for dynamic loading of RGBA OSD image via SDK
Multiple Cards per System Support for multiple cards plugged to one system
On-board rotary switch to set card number, with 16 positions from 0 to F
System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on
The video and audio device names displayed in your software will include the card number (set by the rotary switch)
Multiple Output Streams Unlimited output streams for any one input channel
Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream
Ultra Low Latency Support Latency of 64 video lines
Partial notification mode in SDK
Timestamp & A/V Synchronization Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)
Video Output SG-DMA ~400MB/s per channel DMA bandwidth in PCIe 2.0 system
~200MB/s per channel DMA bandwidth in PCIe 1.0 system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets
SDK Pro Capture SDK for DirectShow for easy integration (Windows)
Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)
Windows Driver Tweaks All options can be controled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customised via registry keys
Firmware Upgrade Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown when it is not in use
Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. This function is only available for firmware version 1.21 and above.
LED Indicator Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Form Factor Normal profile PCIe x1 Add-on Card
92.76mm x 96.24mm (without PCI bracket)
Accessories DVI2VGA connector
DVI-I to HDMI + Component breakout
DB9 to YC + Composite + Analog Audio + Component breakout
Power Consumption Max current at 12V ~0.4 A
Max current at 3.3V ~0.4 A
Max power consumption ~5.4 W
Working Environment Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing

*Specifications correct at time of publication

BACK TO TOP